catalog | saw | Калибр ПЛЭC-250/1700 diamond saw

Калибр ПЛЭC-250/1700 diamond saw table saw Photo

Калибр ПЛЭC-250/1700 characteristics and description:

manufacturer	Калибр
number of speeds	1.00
design	table saw
saw type	diamond saw
tilt angle (degrees)	45.00
cutting height (mm)	65.00
rotational speed (rev/min)	3000.00

Sizes:

weight (kg)	54.00
abutment surface, width (mm)	638.00
abutment surface, depth (mm)	638.00
disk diameter (mm)	250.00
bore diameter disc (mm)	25.00

Efficiency and power consumption:

motor power (hp)	700.00
engine power (W)	1700.00

You can buy Калибр ПЛЭC-250/1700 diamond saw table saw Photo in online stores

catalog: saw

saw Калибр

Characteristics saw Калибр ПЛЭC-250/1700. Abutment surface, width 638.00 - abutment surface, depth 638.00 mm. Motor power 700.00 hp. Engine power 1700.00 W. Number of speeds 1.00. Cutting height 65.00 mm. Disk diameter 250.00 mm. Bore diameter disc 25.00 mm. Tilt angle 45.00 degrees. Rotational speed 3000.00 rev/min. Weight 54.00 kg. Manufacturer Калибр. Diamond saw. Design table saw.

Калибр ПЛЭ-200/1000	Калибр ПЛЭ-200/900	Калибр ПЛЭС-200/850	Калибр ПЛЭС-250/1600
Калибр ПЛЭ-200/800	Калибр ПЛЭC-250/1900	Калибр ПЛЭ-250/1500А	Калибр ПЛЭ-180
Калибр ПЛЭ-150	Калибр ЭПА -200/115	Калибр ПЛЭ-250/1500	Калибр ПЛЭ-250/1850
Калибр ПЛЭС-200/1300	Калибр ПЛЭC-250/1700

---

Use the form below to choose:

manufacturer	battery type	saw type
design	chain pitch	metalworks
battery	additional functions

Garden Flowers, Ornamental Shrubs and Trees, House Plants