chatalóg | chonaic | ДИОЛД ПМ-2,0-1 chonaic gearrtha

ДИОЛД ПМ-2,0-1 chonaic gearrtha chonaic tábla Photo

ДИОЛД ПМ-2,0-1 saintréithe agus Cur síos:

monaróir	ДИОЛД
feidhmeanna breise	glas fhearsaid
líon na n-luasanna	1.00
dearadh	chonaic tábla
cineál chonaic	chonaic gearrtha
uillinn tilt (céim)	45.00
luas rothlach (rev/min)	3800.00

méideanna:

meáchan (kg)	23.00
trastomhas diosca (mm)	355.00
diosca trastomhas tolladh (mm)	25.00
leithead (mm)	500.00
ar airde (mm)	500.00
doimhneacht (mm)	500.00

Tomhaltas Éifeachtúlacht agus cumhacht:

cumhacht mótair (HP)	0.00
cumhacht innill (W)	2000.00

Is féidir leat a cheannach ДИОЛД ПМ-2,0-1 chonaic gearrtha chonaic tábla Photo i siopaí ar líne

chatalóg: chonaic

chonaic ДИОЛД

tréithe chonaic ДИОЛД ПМ-2,0-1. Cumhacht mótair 0.00 HP. Líon na n-luasanna 1.00. Cumhacht innill 2000.00 W. Trastomhas diosca 355.00 mm. Uillinn tilt 45.00 céim. Meáchan 23.00 kg. Luas rothlach 3800.00 rev/min. Feidhmeanna breise glas fhearsaid. Dearadh chonaic tábla. Chonaic gearrtha. Monaróir ДИОЛД. Diosca trastomhas tolladh 25.00 mm. Méideanna 500.00x500.00x500.00 .

ДИОЛД ПМ-2,2-1

ДИОЛД ПМ-2,0-2

ДИОЛД ПМ-2,0-1

15,29 €	41,03 €	7,47 € (83,00 € / kg)	74,15 €
19,99 €	24,95 €	14,95 € (14,95 € / kg)	62,25 €
20,99 €	12,90 €	5,98 €	124,55 €

	$229.99 Lynx 6' Two Man Crosscut Saw
	$269.45 WEN CM1446 15-Amp 14-Inch Multi-Material Cut-Off Chop Saw with Carbide-Tipped Metal-Cutting Saw Blade
	$126.99 Kreg KMA2700 Accu-Cut 48-Inch Guide Track System With KMA2685 Rip-Cut 24-Inch Precision Edge Guide
	$119.00 Metabo HPT 10-Inch Compound Miter Saw \| Single Bevel \| 15-Amp Motor \| 0-52° Miter Angle Range \| 0-45° Bevel Range \| Large Table \| 10 Inch 24T TCT Miter Saw Blade \| C10FCG(S)
	$1,023.00 Husqvarna K770 + 1 Shark Blade
	$1,249.00 DEWALT Wet Tile Saw with Stand, High Capacity, 10-Inch (D36000S)